Product Overview
The Atlas APEX8-EXT-L is an ALI Certified four-post lift, designed for homeowners and restoration shops. It allows users to double their space by stacking cars and is almost 200 pounds heavier than comparable lifts. It includes a free caster kit with polyurethane wheels for portability. This lift is not recommended for commercial repair shops.
- ALI Certified
- 8,000 lb. Capacity
- Atlas Powder Coat Finish
- Single Point Release
- Ladder Lock Design
- Dual Locking Safety System
- Optional Anchor Bolts (Sold Separately)
- Steel Approach Ramps (Included)
- Four Wheel Stops (Included)
- Two Rubber Wheel Chocks (Included)
- Caster Kit with Polyurethane Wheels (Included)
- Drip Trays (Included)
- Jack Trays (Included)
- Perfect for storing or working on vehicles
| Lifting Height | 84" (7') |
| Overall Width (without motor) | 108" (9') |
| Overall Width (with motor) | 116 1/2" (9' 8 1/2") |
| Length Between Columns | 176 1/2" (14' 8 1/2") |
| Overall Length with Approach Ramps | 222" (18' 6") |
| Overall Length without Approach Ramps | 185'' |
| Approach Ramps | 37" (3' 1") |
| Overall Runway Width | 22" (with rails) or 18 3/4" (drive surface) |
| Runway Length | 185" (15' 5") |
| Runway Thickness | 4 1/2" |
| Width Between Runways | 38" (3' 2") |
| Width Between Runway Rails | 34" (2' 10") |
| Outside of Runway to Outside of Runway | 77 3/4" (6' 5 3/4") |
| Clearance Under Runways | 78 1/2" (6' 6 1/2") |
| Column Size | 98 1/2" (8' 2 1/2") |
| Clearance Between Columns | 98" (8' 2") |
| Column Base | 98 1/2" (8' 2 1/2") |
| Column Height | 98 1/2" (8' 2 1/2") |
| Maximum Wheelbase | 173" (14' 5") |
| Drive Thru (Outside of tire to outside of tire) | 84" (7') |
| Cable Diameter | .350" |
| Steel Gauge | Gauge 6 (.1875"/ 3/16" / 4.75mm) |
| Motor | 110 Volt - A 30 Amp Breaker is required |
| Oil Requirement | 3-5 gallons AW32/AW46 |
| Shipping Weight and Dimensions |
2139 LB. 187 x 23,62 x 28,82 |
This item is warranted for five (5) years on structural components, two (2) years on hydraulic cylinders, and one (1) year on electric or air/hydraulic power units from the invoice date. Wear parts are covered by a 90-day warranty. The LIMITED warranty policy does not include a labor warranty. ATLAS Automotive Equipment does not send field technicians for equipment repairs. Buyers of this equipment are assumed to be mechanics or have mechanic employees to perform essential repair and/or maintenance services. A list of technicians who can go on-site at the customer's expense is available.
NOTE: For validity, all warranty claims must be pre-approved by the manufacturer. The manufacturer will repair or replace, at its option, during this period, parts returned to the factory freight prepaid, which prove defective upon inspection. This warranty applies only if the product is installed, operated, and maintained in accordance with the manufacturer's instructions. It applies only to the original purchaser and is not transferable. The warranty covers defects in material and workmanship but does not cover normal service or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, neglect, lack of care in operation, or normal wear. It also does not cover equipment where repairs or modifications have been made or attempted. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ALL SUCH IMPLIED WARRANTIES ARE EXPRESSLY EXCLUDED. The remedies described are exclusive, and in no event shall the manufacturer or any affiliated company be liable for special, consequential, or incidental damages resulting from the breach or delay in performance of this warranty. This includes, without limitation, loss of profit, rental or replacement equipment, or any other commercial loss. The warranty is governed by the laws of Canada and is subject to the exclusive jurisdiction of the province or territory in which the equipment is sold and shipped. Prices and specifications are subject to change without notice. All orders will be invoiced at prices prevailing at the time of shipment. Prices do not include local, provincial, or federal taxes, if any. All taxes are subject to the prevailing rate where Atlas products are sold or shipped. Products cannot be returned without the prior written consent of the manufacturer. Due to the competitive selling price of these lifts, this warranty policy will be strictly administered and enforced.
Most customers are mechanically inclined and look forward to installing and assembling their new acquisition. Most items can be installed and assembled by two people in a reasonable amount of time. Before starting, consider these tips:
- Read the manual carefully. If you can't find it, download it from the product page on the website.
- Watch the videos posted on each product page for insider information.
- If you haven't received your item yet, get an idea of what you'll need to do to transport or unload it.
- Plan your installation, ensuring the area is clean and clear.
- Bring the entire crate as close as possible to the installation area.
- Disassemble the packaging and parts, ensuring all parts are present.
- If reading the manual, get 2 or 3 steps ahead of your current situation.
Be sure to check the electrical requirements of the product. Some items are 110V or 220V. Others require an electrician to wire it to your breaker panel or install an outlet.
If you are assembling a car lift, you will need hydraulic fluid. CAUTION: We do not supply hydraulic fluid for your lift. Generally, we recommend using AW-32 hydraulic oil. A 5-gallon bucket is usually more than enough.
When filling your hydraulic fluid for the first time, do not rush the process. Fill the reservoir 1/3 or 1/2 full, then raise and lower the lift. Bleed out the air and kinks, then, when the lift is in the lowest position, fill it to 2/3 or 3/4 and raise and lower it again. DO NOT fill the reservoir beyond 1/3 or 1/2 when the lift is in the up position, as there is sludge in the cylinders and other components. Some hydraulic cylinders may be "air locked" during manufacturing. To remedy this, ensure the cylinder supply hoses are not connected. Using a ratchet strap or similar object, slowly tension the piston end and gently apply pressure while trying to extend the piston from the cylinder.
These tips are friendly suggestions from us and years of experience we have gained working with these products. While they do not apply to all products, we hope you take them to heart while reviewing other information (such as manuals and videos) that we provide regarding the assembly and setup of your product. Your safety and satisfaction are our primary concerns. If you have any questions or concerns throughout the assembly or use of your product, please do not hesitate to contact us.
For all customer, supplier, and media inquiries, we encourage you to contact us by your preferred method:
By Phone:
Local 403.398.5020
Toll-Free 866.284.8604
Monday-Friday
8:00am-5:00pm MST
By Fax:
Toll-Free 866.398.5020
By Email:
customercare@atlasautoequipment.ca
In Person
Click here to see our locations.
Monday to Friday
8:00 AM - 5:00 PM MST
Weekends and Holidays
Closed
NOTICE REGARDING OUR SHOWROOM
In order to offer our customers the highest quality products at the most competitive prices, our business structure does not allow us to operate a showroom. Eliminating this expense is one of the many tactics we employ to ensure our customers continue to benefit from the most innovative offers.
If you need clarification on specifications, product styles, or would like more information than what is provided on our site, please do not hesitate to contact us and one of our friendly customer service members will be happy to assist you.
Knowing that each customer has unique needs when receiving their product, we strive to offer shipping solutions for every customer, regardless of their geographical location.
Please contact our customer service staff at toll-free 1-866-284-8604 and they will be happy to help you find the most convenient and cost-effective options for receiving your order.
Shipping and pickup options are both available.
We are happy to be able to offer you a financing option as a new payment method for your purchase.
Available through a Canadian-based third-party company, financing can be beneficial for many reasons:
- You do not have to pay the full price upfront.
- Depending on the information provided, there are reasonable or even no "down payments."
- Amortizing the purchase over a set period allows you to make budgeted payments.
- Budgeting payments allows you to recover the cost of the machine through revenue over a long period.
- Reasonable interest rates
- Various security options
Whether you simply want to make smaller payments or prefer the financing method, our third-party financing company will work quickly to provide you with all available options.
Their friendly approach ensures that all customers who seek to finance or are simply exploring the possibility will receive accurate information, with no hidden fees, terms, or tricks.
If you would like more information on financing, please contact our customer support team toll-free at 866.284.8604 or by e-mail customercare@atlasautoequipment.ca.
We also invite you to contact our rental partner directly to start the pre-approval process or to answer your questions.
ATLAS AUTOMOTIVE EQUIPMENT EXTENDED WARRANTY PROGRAM - CANADA
Terms and Conditions
Atl
