Product Overview
The APlusLift HW-10KOH-A is a robust and budget-friendly 2-post overhead car lift designed to meet the demands of both professional workshops and advanced DIY enthusiasts. With a substantial 10,000 LB (approximately 4,536 kg) lifting capacity, it is ideally suited for safely raising a wide range of vehicles, including passenger cars, trucks, and SUVs.
This lift features an industrial-grade **double “S” column structure** for enhanced stability and durability. Its construction boasts an **all-robot-welded steel frame** with a protective **powder coat finish**, ensuring exceptional resistance to corrosion and a prolonged service life. Safety is a key priority, evident in its **double-point safety lock release system**, which provides enhanced stability and precise control during operation. The hydraulic system is **CE-certified**, indicating it has been rigorously tested for 115% dynamic and 150% static load capacities, guaranteeing reliable and secure performance.
The HW-10KOH-A incorporates a versatile **combo arm assembly**, allowing it to support both symmetrical and asymmetrical lifting configurations to accommodate various vehicle types and lifting points. It includes essential accessories such as adjustable screw pads and 4-inch tall truck adapters. The use of **Q355 grade carriage material** (stronger than typical Q235 steel) and self-lubricating nylon sliders further enhance its durability and ensure smooth, consistent vertical travel. Built-in safety features like a relief valve in the power pump to prevent overloading and an up-limit switch to protect the cylinder stroke contribute to its overall reliability and operator safety. Backed by an industry-leading **3-year parts warranty**, the HW-10KOH-A offers significant value and peace of mind.
- 10,000 LB (4,536 kg) Capacity: Ideal for lifting passenger cars, trucks, and SUVs.
- Double-Point Safety Lock Release: Enhances stability and safety control during operation.
- Combo Arm Assembly: Supports both symmetrical and asymmetrical vehicle lifting.
- Durable Build: Features an all-robot-welded steel frame with a robust powder coat finish for corrosion resistance.
- CE Certified System: Hydraulic system rigorously tested for 115% dynamic and 150% static load capacities.
- Adjustable Pads & Truck Adapters: Includes 4-inch tall adapters and adjustable screw pads for versatile use.
- High-Strength Materials: Utilizes Q355 grade carriage material, superior to standard Q235 steel.
- Smooth Operation: Self-lubricating nylon sliders ensure effortless vertical travel of the carriage.
- Built-in Safety: Features a relief valve to prevent overloading and an up-limit switch to protect cylinder stroke.
- Industry-Best 3-Year Parts Warranty: Provides extensive coverage and peace of mind.
| Lift Model | HW-10KOH-A |
| Lifting Capacity | 10,000 LB (4,536 kg) |
| Overall Height | 143 3/16" (363.7 cm) |
| Overall Width | 134 5/16" (341.1 cm) |
| Drive-Through Width | 100" (254.0 cm) |
| Column to Column Width | 109" (276.9 cm) |
| Lift Height (w/ Truck Adapters) | 81" (205.7 cm) |
| Lift Height (Without Adapters) | 75" (190.5 cm) |
| Maximum Arm-to-Ground Height | 71" (180.3 cm) |
| Minimum Pad Height | 4" (10.2 cm) |
| Front Arms | 3-stage (22 7/8" to 42 5/8") |
| Rear Arms | 2-stage (33 5/8" to 52 7/8") |
| Motor | 220V Single Phase, 3HP, 10A (30A breaker recommended) |
| Lift Time to Full Rise | 50 seconds |
| Shipping Weight | 1,470 lbs (666.8 kg) |
| Steel Thickness (Column) | 13/64" (approx. 5.16 mm) |
| Steel Thickness (Carriage) | 15/64" (approx. 5.95 mm) |
| Steel Thickness (Yoke) | 9/16" (approx. 14.3 mm) |
| Steel Thickness (Base) | 5/8" (approx. 15.9 mm) |
| Concrete Requirement | 6" thick at 3500 PSI reinforced (minimum) |
| Warranty | 3-year parts warranty |
Included Components:
- 4 adjustable screw pads
- 4 truck adapters (4")
- 10 anchor bolts
- 10 shims
- 2 tool trays
- 2 toe guards
Optional Components:
- 2 3/4" and 6" truck adapters
